Replacing Sway bar links, Tie Rod End, Ball Joint, inner tie rod, Control Arm for BMW
Chassis Parts for BMW Passenger Vehicles.
Features
Within our extensive product selection, you will find an array of BMW suspension components, such as sway bar links, tie rod ends, ball joints, inner tie rods, control arms, rack ends, stabilizer links, and more.
Developed from OEM samples, our parts adhere to American standards such as SAE J490 and J491, as well as the stringent quality requirements of the German automotive aftermarket.
Features:
1. Made with cold forged or hot forged high strength steel.
2. Surface treatment applied and giving the best anti-rusty protection.
3. Laser etched manufactured tracking batch codes.
4. Pull or Push out strength is equal to OE or even higher.
5. OE replacement directly without fitting issues.
6. Small quantities are acceptable, MOQ is as low as 30 pcs.
Product Failure Symptoms:
Loose or Unstable Steering: Excessive play in the steering wheel or lack of stability while driving may indicate issues with tie rod ends, rack ends, ball joints, or stabilizer links.
Unusual Noises: Knocking, clunking, or squeaking sounds during turns or when going over bumps could signify worn-out or faulty suspension and steering parts.
Vibration or Shaking: Vibrations felt through the steering wheel or an overall shaking sensation while driving may suggest problems with ball studs, pillow ball joints, or related components.
Uneven Tire Wear: Uneven wear patterns on tires, especially on one side or specific areas, could point to suspension system problems, including worn-out or damaged parts.
Remember, consulting a qualified professional will help accurately diagnose the issue and ensure appropriate action is taken.
Company Warranty:
We offer a comprehensive warranty to ensure customer satisfaction:
Limited Lifetime Warranty: We provide a 2 years or 50,000 KM warranties on our suspension and steering parts, covering manufacturing defects and premature failures under normal driving conditions.
Terms and Conditions: The warranty is subject to certain terms and conditions, including proper installation by a certified technician, adherence to recommended maintenance schedules, and use within the intended application.
Exceptional Customer Support: We have a dedicated customer support team ready to assist you with any warranty-related inquiries or concerns. Our goal is to ensure your satisfaction and promptly resolve any issues that may arise.
Please note that specific warranty coverage details may be provided with your product or can be obtained by contacting our customer support team directly.
Engineered for BMW X3/X4 steering linkage, this inner tie rod features a robust S18C housing for strength and vibration damping. Its heat-treated SCM440 ball pin achieves HRC30±3 hardness, complemented by manganese phosphate coating for corrosion resistance. Designed to OEM specs with a low torque standard (<7.2 Nm) for enhanced control and a wide 60-68° swing angle for flexible handling. Rigorously tested for pull strength and gap tolerance, it ensures durability and easy installation with included accessories. Traceability via laser-etched codes. Backed by a 2-year/50,000km limited warranty . Click here to request your samples, today.
LAND ROVER RANGE ROVER III 02~12 4WD, L322
LAND ROVER RANGE ROVER SPORT 05~13 4WD, L320
BMW 7-SERIES 01~08 E65, E66, E67
OEM REF.
QJB500060 SGH000010 TIQ000040 EV800549 EV800279
32-21-6-756-368* 32-10-6-774-360* 32-10-6-777-268* * Part of Tie Rod End
This Rack end fits
BMW 3-SERIES Car Models 1999~2005
BMW Z4 Car Models 2003~2008
It features S18C housing for strength and vibration reduction. SCM440 Ball Pin with heat treatment achieves HRC30±3 hardness. Manganese phosphate treatment prevents corrosion. Torque standard is under 7.2 Nm, enhancing control. Swing angle of 60-68 degrees enables flexible handling. It undergoes rigorous testing for high-intensity pull and gap tolerance, ensuring durability. Designed according to OEM specifications, comes with complete accessories for easy installation. Laser-etched codes ensure traceability. Minimum order of 30 pieces accepted. 2year or 50,000km warranty provided.Leading Taiwanese supplier prioritizing quality and safety.
This Rack end fits
BMW 3-SERIES Car Models 1982~1992
It features S18C housing for strength and vibration reduction. SCM440 Ball Pin with heat treatment achieves HRC30±3 hardness. Manganese phosphate treatment prevents corrosion. Torque standard is under 7.2 Nm, enhancing control. Swing angle of 60-68 degrees enables flexible handling. It undergoes rigorous testing for high-intensity pull and gap tolerance, ensuring durability. Designed according to OEM specifications, comes with complete accessories for easy installation. Laser-etched codes ensure traceability. Minimum order of 30 pieces accepted. 2year or 50,000km warranty provided.Leading Taiwanese supplier prioritizing quality and safety.
This Rack end fits
BMW 5-SERIES Car Models 1997~2004
BMW Z8 Car Models 2000~2003
It features S18C housing for strength and vibration reduction. SCM440 Ball Pin with heat treatment achieves HRC30±3 hardness. Manganese phosphate treatment prevents corrosion. Torque standard is under 7.2 Nm, enhancing control. Swing angle of 60-68 degrees enables flexible handling. It undergoes rigorous testing for high-intensity pull and gap tolerance, ensuring durability. Designed according to OEM specifications, comes with complete accessories for easy installation. Laser-etched codes ensure traceability. Minimum order of 30 pieces accepted. 2year or 50,000km warranty provided.Leading Taiwanese supplier prioritizing quality and safety.
This Rack end fits
BMW M3 Car Models 1995~2002
BMW Z3 Car Models 1995~2003
It features S18C housing for strength and vibration reduction. SCM440 Ball Pin with heat treatment achieves HRC30±3 hardness. Manganese phosphate treatment prevents corrosion. Torque standard is under 7.2 Nm, enhancing control. Swing angle of 60-68 degrees enables flexible handling. It undergoes rigorous testing for high-intensity pull and gap tolerance, ensuring durability. Designed according to OEM specifications, comes with complete accessories for easy installation. Laser-etched codes ensure traceability. Minimum order of 30 pieces accepted. 2year or 50,000km warranty provided.Leading Taiwanese supplier prioritizing quality and safety.
Rack End 32-11-6-761-557 for BMW MINI CONVERTIBLE & MINI ONE & MINI COOPER
This Rack end fits
BMW MINI CONVERTIBLE Car Models 2003~2006
BMW MINI COOPER Car Models 2003~2006
BMW MINI ONE Car Models 2001~2006
It features S18C housing for strength and vibration reduction. SCM440 Ball Pin with heat treatment achieves HRC30±3 hardness. Manganese phosphate treatment prevents corrosion. Torque standard is under 7.2 Nm, enhancing control. Swing angle of 60-68 degrees enables flexible handling. It undergoes rigorous testing for high-intensity pull and gap tolerance, ensuring durability. Designed according to OEM specifications, comes with complete accessories for easy installation. Laser-etched codes ensure traceability. Minimum order of 30 pieces accepted. 2year or 50,000km warranty provided.Leading Taiwanese supplier prioritizing quality and safety.
This BMW rack end (OE# 32-10-6-778-547) is precision-engineered for a perfect fit and optimal performance across various BMW MINI models.
Compatible Vehicle Models
BMW MINI CLUBMAN (R55) 2007~2014
BMW MINI CLUBVAN (R55) 2012~2014
BMW MINI (R56) 2006~2013
BMW MINI CONVERTIBLE (R57) 2007~2015
BMW MINI COUPE (R58) 2011~2015
BMW MINI ROADSTER (R59) 2012~2015
BMW MINI COUNTRYMAN (R60) 2010~2016
BMW MINI PACEMAN (R61) 2012~2016
Rack Ends: Features & Advantages
Our Rack Ends are meticulously engineered for superior performance and reliability. Every Great Auto Parts BMW rack end ensures a seamless fit and enhanced driving experience.
Unmatched Strength & Durability: Robust S18C housing and heat-treated SCM440 ball pin (HRC30±3) offer exceptional wear resistance and lifespan.
Superior Corrosion Protection:Manganese phosphate treatment provides excellent rust and corrosion resistance.
Precise & Responsive Handling: Optimized torque standard (under 7.2 Nm) and special bearing parts allow for a 60-68 degree swing angle, ensuring effortless, flexible steering.
Guaranteed Quality: Rigorous high-intensity pull and gap tolerance testing verifies durability and reliability.
Effortless Installation: Designed to OEM specifications with complete accessories for a perfect, straightforward fit.
Full Traceability:Laser-etched codes provide complete product traceability for quality control.
Choosing a Great Auto Parts BMW rack end means investing in your vehicle’s longevity and performance. Explore our full range of suspension and steering components to find other compatible parts.
Bulk Order Customization
For bulk purchasers, we offer flexible customization services:
Dimensional adjustments
Material selection
Various surface treatment options
Visit our Custom Solutions page for more details on how we can support your business.
Confidence in Every Part
We back our quality with a 2-year or 50,000 km warranty. Great Auto Parts prioritizes safety and excellence in every BMW rack end. With a minimum order of just 30 pieces, contact us today to enhance your vehicle’s safety and performance. For inquiries about other BMW parts or our manufacturing process, feel free to contact our sales team.
This Rack end fits
BMW X3 Car Models 2004~
BMW X5 Car Models 2000~
It features S18C housing for strength and vibration reduction. SCM440 Ball Pin with heat treatment achieves HRC30±3 hardness. Manganese phosphate treatment prevents corrosion. Torque standard is under 7.2 Nm, enhancing control. Swing angle of 60-68 degrees enables flexible handling. It undergoes rigorous testing for high-intensity pull and gap tolerance, ensuring durability. Designed according to OEM specifications, comes with complete accessories for easy installation. Laser-etched codes ensure traceability. Minimum order of 30 pieces accepted. 2year or 50,000km warranty provided.Leading Taiwanese supplier prioritizing quality and safety.
